5 Best Double Wide Blade Putters (Best Putters to Buy)

You love the clean lines of a blade putter at address. That classic Anser profile just frames the ball right. But you also know the truth — traditional blades punish off-center hits. Maybe you tried a mallet. Parked that big head behind the ball, and suddenly your alignment felt wrong. Too bulky. Too busy. You went back to your blade, even knowing you were leaving strokes on the green.

A double wide blade is the answer nobody talks about enough. It takes the shape you already trust, widens the body just enough to push weight to the heel and toe, and gives you the forgiveness of a mallet without the look of one. After testing five of the top options right now, the Odyssey Ai-ONE came out as the best all-around performer — but every putter here has a case depending on what you value most.

Here is the simple truth about the best double wide blade putters: they save you 2-3 putts a round compared to a traditional blade, and they do it without asking you to change what you like about lining up a putt.

The Best Double Wide Blade Putters at a Glance

If you want the quick version before the deep breakdown, here is the shortlist in order of recommendation. I ranked these based on feel, forgiveness, adjustability, build quality, and overall value for a mid-to-low handicap golfer looking to switch from a traditional blade.

What Exactly Is a Double Wide Putter?

Here is the simplest way to picture it. Take a traditional blade — say a Ping Anser 2 — and widen the body by about 30-40 percent. You push more weight toward the heel and toe. That wider footprint gives you a higher moment of inertia (MOI), which means less twisting on off-center strikes. But the overall profile still looks like a blade from above. It is the Goldilocks zone between a skinny blade and a bulky mallet.

I have tested all three categories extensively. A standard blade feels pure when you hit the center but punishes you on mishits with distance loss and offline putts. A mallet forgives everything but can look like a spaceship behind the ball. A double wide splits the difference — you get blade-like alignment cues with noticeably better stability on strikes that are slightly toward the toe or heel.

Who Should Switch to a Double Wide?

If you have a slight arc in your stroke — meaning the putter face opens slightly on the backswing and closes through impact — a double wide feels natural. The extra width gives you stability without fighting your natural motion. I have a moderate arc, and the transition felt seamless within about 10 practice putts.

Who should probably skip it? If you have a very strong arc stroke with heavy toe flow, the higher MOI of a double wide can make the face feel dead or resistant to rotation. Some players describe it as the putter not wanting to close through impact. Also, if you love the feel of a traditional blade and rarely miss center, you might not gain enough to justify the switch.

The Best Double Wide Blade Putters Reviewed

I tested each of these putters over several rounds and practice sessions. The criteria were simple: feel at impact, forgiveness on mishits, look at address, build quality, and how much confidence they gave me over 5-foot putts when the pressure was on. Here is how they stacked up.

1. Odyssey Ai-ONE Putter

Specs: Alloy steel head, uniflex shaft, ambidextrous hand orientation, standard rubber grip, 3-degree loft.

This is the putter I keep going back to. The Ai-ONE face is the standout feature here. Odyssey used artificial intelligence to design a urethane insert with variable thickness across the face, and the result is a feel that somehow manages to be both soft and responsive. On center strikes, you get that muted, satisfying thump. On off-center hits — and I purposely hit a few toward the toe — the ball speed stays remarkably consistent. I did not see the drop-off in distance that I would expect from a standard blade.

What surprised me most was the alignment. The double wide shape frames the ball beautifully, and the single alignment line sits clean and uncluttered. I found myself lining up 5-footers with more confidence by the second round. The forgiveness really does save you — I estimate I holed two or three putts per round that I would have lipped out with my old blade.

The alloy steel build feels solid without being heavy. And since Odyssey is the most trusted putter brand on tour, you are not taking a gamble on quality. The only trade-off? Some purists prefer the feel of a milled face over an insert. If you are one of those players, the Ping PLD might speak to you more. But for most of us, the Ai-ONE is the best all-around performer in this category.

2. Cobra Golf Vintage WIDESPORT Putter

Specs: 34-inch length, 2.5-degree loft, stainless steel head, Pebax insert, Super Stroke Zenergy GT 1.0 grip, right-hand orientation, adjustable weighting system.

If you are the type who likes to fine-tune every variable in your bag, the WIDESPORT is your putter. The adjustable weighting system lets you swap out heel and toe weights to dial in exactly the swing weight and feel you want. I experimented with heavier weights in the toe for a slightly softer feel and then switched to a balanced setup. The change was noticeable within a few putts.

The Pebax insert gives a soft, responsive feel that sits between a milled face and a firmer insert. It is not mushy, but it is not clicky either. The Descending Loft Technology is also worth mentioning; it reduces the loft slightly through the hitting area to minimize skid and get the ball rolling sooner. On the greens, I noticed the ball started rolling end-over-end faster than with some other putters.

The Super Stroke Zenergy grip is a personal preference thing. I like it — the larger profile keeps my hands quiet. But I know some players prefer a traditional pistol grip. The good news is you can easily swap it. The downside is that Cobra still does not have the same putter cachet as Odyssey or Ping in the golf world. The putter performs, but it does not have the same tour presence if that matters to you.

3. MacGregor Golf MT Milled 001 Wide-Blade Putter

Specs: 34-inch or 35-inch length, 3-degree loft, CNC-milled carbon steel head, 10g heel/toe weights, single alignment line, 71-degree lie angle, synthetic rubber grip, right-hand only.

This is the dark horse of the list. MacGregor is not the first name you think of for putters, but the MT Milled 001 deserves a serious look. The head is precision CNC-milled from a billet of carbon steel, which gives it a noticeably softer feel than stainless steel. I noticed it immediately on the first few putts — a warm, dense impact that is hard to find at this price point.

The double wide design comes with pre-installed 10-gram weights in the heel and toe. That might not sound like much, but it makes a real difference in stability. I tested it against my traditional blade on a practice green, and the MT Milled 001 twisted noticeably less on toe-side mishits. The ball stayed closer to my intended line.

The single alignment line is clean and unobtrusive — no visual clutter. The carbon steel construction means it will develop a patina over time if you prefer that natural worn look. The big question mark is brand trust. MacGregor is newer to the putter game, and there is only a handful of reviews out there so far. But based on my testing, this putter performs well above its price class. If you are budget-conscious but want a milled blade feel, this is the one to grab.

4. Ping PLD Milled Anser 2D Gun Metal Putter

Specs: 33-inch length, 17-4 stainless steel head, PLD CNC milling, gun metal finish, graphite shaft, Tour Velvet grip, right-hand and left-hand available.

If you appreciate craftsmanship, this is the putter that feels like art. The PLD (Putting Lab Design) milling process is Ping’s highest level of precision — the face is milled from a solid block of 17-4 stainless steel with tolerances that most manufacturers do not touch. The result is a consistency of feel across the entire face that is hard to beat. Every strike sounds and feels the same.

The Anser 2 shape is the most copied putter design in golf history, and the “2D” designation means it has the wider, double-wide body that gives you extra forgiveness while keeping the classic profile. The gun metal finish is a nice touch — it reduces glare and looks premium without being flashy. I left it in my bag after a round and kept picking it up just to look at it.

That said, there are a few things to consider. The graphite shaft is standard on this model, and if you prefer the feedback of a steel shaft, it might feel slightly muted. The milled face is also firmer than an insert — if you love the soft feel of an Odyssey White Hot or a Pebax insert, this will feel noticeably different. And the price point is premium, even in used condition. You are paying for precision engineering, and you get it. But for the same money, the Odyssey Ai-ONE offers more forgiveness technology.

5. TP Hydroblast Del Monte 1 Putter

Specs: 34-inch length, 3-degree loft, 45-degree lie angle, premium milled 303 stainless steel head, Surlyn insert with 45-degree grooves, optional weights included, 630 grams head weight, left-hand only.

The Del Monte 1 has a lot going for it on paper. The 303 stainless steel is premium — it feels dense and well-balanced in the hands. The Surlyn insert with 45-degree grooves is designed to optimize forward roll, and on good strikes, the ball does launch off the face with a lively, responsive feel. The optional weights let you dial in swing weight, which is a nice touch for a putter in this range.

But there is a major limitation here. This putter is left-hand only. If you are a lefty, great — this is one of the better options available in the double wide category. If you are right-handed, you cannot use it. That alone drops it to the bottom of the rankings for a general audience.

Beyond that, the feel is a mixed bag. The Surlyn insert is firm but not as consistent across the face as the Odyssey Ai-ONE or the milled Ping PLD. I noticed that toe-side hits produced a slightly harsher feel and more distance loss than the top contenders.

The hydroblast finish looks good and resists glare, but the overall package does not stand up to the Odyssey or the Cobra in terms of forgiveness. For left-handed golfers specifically, it is worth a look. For everyone else, look elsewhere on this list.

The Final Verdict: Which One Is for You?

Every putter on this list will improve your consistency compared to a traditional blade. But the right choice depends on what you value most.

The best double wide blade putter is the one that makes you feel confident over a 5-footer when the round is on the line. For me, that was the Odyssey Ai-ONE — it combined the forgiveness I was looking for with the feel and look I did not want to give up. But the Cobra Widesport, MacGregor MT Milled, and Ping PLD Anser 2D all have strong cases. The good news is that you cannot really go wrong in this category. The bad news? You will have no more excuses for missing short ones.

Frequently Asked Questions

Is a double wide putter considered a mallet?

No. A double wide putter sits between a traditional blade and a mallet. It has a wider body than a blade — roughly 30-40 percent wider — but keeps the classic Anser-style profile and alignment cues. Mallets are typically much larger, with significant weight pushed to the perimeter and a distinctly different look at address. A double wide looks like a blade but performs closer to a mallet in terms of forgiveness.

What stroke type works best with a double wide blade putter?

Double wide putters generally pair best with a slight arc stroke. The moderate toe hang (usually from a double bend or slight plumber’s neck hosel) allows the face to open and close naturally while the wider body provides stability. If you have a very strong arc stroke with heavy face rotation, you might find the higher MOI resists your natural motion. If you have a straight-back-and-through stroke, look for a face-balanced double wide model.

Will a double wide blade putter improve my putting?

It can, specifically if you currently use a traditional blade and lose strokes on off-center hits. The extra perimeter weighting reduces twisting on mishits, which keeps the ball closer to your intended line and maintains more consistent distance control. Most golfers I have talked to who made the switch report saving 2-3 putts per round, particularly from 5-15 feet where stability matters most.

Are double wide blade putters legal according to USGA rules?

Yes, all the putters reviewed here conform to USGA and R&A rules. Double wide blades fall within the standard putter head dimensions and design regulations. There are no restrictions on the double wide shape specifically, as long as the putter meets the overall equipment standards for head size, weight, and face characteristics.